Multifunction Devices


Testing may include network connectivity and running of proprietary and industry standard test suites. Select the Advanced menu, then the Drive Configuration menu. Do not install a standoff at a location that does not have a corresponding server board mounting hole. See your chassis documentation to complete rack or pedestal installation. Without this cable the processor will not have any power.

Uploader: Zubei
Date Added: 24 January 2005
File Size: 21.95 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83586
Price: Free* [*Free Regsitration Required]

When the copy process is complete, remove the disk. Install the standoffs Nine standoffs must be installed into the chassis before installing the s3210sj board.

The underside of the processor has components that may damage the socket pins if installed improperly. Close load plate and socket lever Close the load plate all the way as shown. Floppy Drive Connector G. Repeat this procedure for each fastener.

Name the volume and press Enter. Attach the CPU power connector as shown.

Technical Product Specifications for Intel® Server Board SSH,

To avoid integration difficulties and possible board damage, your system must meet the following minimum requirements:. The following information will help you integrate your new server board into a server chassis. Push down firmly on the DIMM until it snaps into place and both levers close. Anyone seen this type of thing before? Note Verify that each server board mounting hole location has an installed standoff. Press Y to confirm exit.


The labels should be visible from the outside of the chassis. When installing the server board into a reference chassis, refer to the reference chassis instructions. Return to this document to finish up, including software, BIOS, drivers and operating system installation. Installation and service of this products should only be performed by qualified service personnel to avoid risk of injury from electrical shock or energy hazard.

If new versions are available, update the BIOS on your server. The remaining drives are selected automatically the image below shows the hard drives on Port 0 and Port 1 have available capacity.

Quick Start User’s Guide for Intel® Server Board S3210SHLX

Please consider upgrading to the latest version of your browser by clicking one of the following links. Select a volume type and click Next. When unpacking a processor, hold by rqid edges only to avoid touching the gold contacts Open the socket lever Push the lever handle down and away from the socket to release it.

Save Changes, go back into Boot Order, changed back! To set up a system with matrix RAID, follow these steps: Adapter compatibility validation CV testing uses test suites to gain an accurate view of how the server performs with a wide variety of adapters under the primary supported operating systems.


Set the Drive Mode option to Enhanced. Use the fasteners that came with your chassis. The system sometimes works, but is exhibiting erratic behavior.

How to Enable Intel® Matrix Storage RAID for the Intel® Server Board S3000AH Family

Press Enter to confirm and continue. Results 1 to 3 of 3. Use the instructions provided with the RAID controller and with the operating system. Install the server board Install the standoffs Nine standoffs must be arid into the chassis before installing the server board.

Close the socket lever and ensure that the load plate tab engages under the socket lever when fully closed. If you require a response, contact support.

Back To Top