My brother has a p where the screen is just black. Separate the inverter board from the display cover and unplug cables on both side of the inverter. Before it went completely black he managed to get a picture every now and then by turning the laptop off, and then on again over and over. Now the cable from the screen to the inverter does not fit. I have a HP compaq p.
|Date Added:||7 April 2015|
|File Size:||25.17 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
So many thanks, I thought I had to buy a NEW displsy for my hp computer and I discover screen inverter thing on your website.
15.4″ LCD Screen Display for HP Compaq 8510p WSXGA
Works fine with an external monitor. Hi, The internal screen works fine, but I have an external monitor with better quality. I have followed your advice above to remove the screen inverter on my HP W as the sympton where my screen was working normally and then suddenly started to flicker and then whent black with the very faint image of windows still barely visible and an expternal monitor 88510p perfectly normally. When inverter fails, the LCD goes dark.
Unfortunately, there is not much you can do to fix this problem. If external video works fine and the problem appears only on the laptop screen most likely the laptop screen is failing.
15.4 LCD Screen Display for HP Compaq 8510p WSXGA
You can see the inverter board located on the lower part of the display assembly. Before it went completely black he managed to get a picture every now and then by turning the laptop off, and then on again over and over.
My husband and just notice that there is a multicolored cord not connected in the key card port area. Hi IML Tech, thanks for a very useful guide.
Tell me more about your problem.
Unfortunately, the VGA port soldered directly to the motherboard. Do you have any idea, could it be a hardware problem? I reinstalled the Catalyst driver with the latest one, nothing changed. Mark, Compaq p when it starts up i get lines on the display after a short time i get a cloudy 85100p around the edge.
LCD Screen Display for HP Compaq p WSXGA | eBay
Compaq p when it starts up i get lines on the display after a short time i get a cloudy image around the edge. Apparently, it has bad solder joint somewhere on the controller board and when you move the screen, you make it work temporarily.
What can it be. Disassemble the display panel so you can access the back side of the LCD screen. After a while it clears up and works good. I have a HP compaq p. How do you tell? Are you trying to connect to the external monitor because the internal screen failed?
Insert a piece of soft plastic I use a guitar pick between the display bezel and screen and slowly move it from left to right to release plastic latches securing the bezel. The image is still on the screen but you can barely see it.
” LCD Screen Display for HP Compaq p WSXGA | eBay
dispoay You can see it on the last picture in this guide: I also have problems turning the laptop on, sometimes it switches on after several presses of the power button. Steve, I guess this could be a problem with the VGA port on your laptop. My brother has a p where the screen is just black.
There is a chance that your new screen will work properly if you replace the cable. I think it could be some electrical problem as it uses the 3rd power supply with the disllay laptop, during the times all of them failed to charge the battery. Mwewa Matipa, Did you test the power adapter? Any help would be appreciated. I tried to connect several LCD monitors both wide and not wide screens I can see the screen for a second than it goes black.
In this guide I explain how to take apart the display panel and replace the inverter board in HP Compaq p and w notebooks.